Cranks

Chromoly 4-Piece Pro Cranks

# Black powder coat and Raw with clear coat finish
# 4130 square tapered design crank arms
# 19mm chromoly axle
# 4 bolt, 104mm spider
# Euro sealed bottom bracket included
# Available in 170mm, 175mm and 180mm

The crank set include a 19mm chromoly spindle and crank arm and independent chain ring spider. The 4 bolt, 104mm spider is placed directly on the spindle so it can be spaced in 1mm increments for precision chain alignment, independent of the crank arms. This allows the cranks to remain placed directly under the rider to maintain a proper Q factor.

Installation is a breeze, the spider and crank arms slide easily on the spindle using an 8mm allen key to tightening the end bolts and a 6mm key to tighten the crank arm pinch bolts, no banging and pressing required.

A 25t sprocket is available and can be installed on the right or left side for riders who use right side pegs.

The cranks are strong and ridged and are intended to be used for BMX race, freestyle, MTX and downhill. Available in crank arm sizes 170mm, 175mm and 180mm and color black and raw with clear coat.

Weight: 40.6oz

Aluminum 4-Piece Expert Cranks COMING SOON!

* Black, Blue, Platinum,and Red anodize finish.
* 6061 Aluminum forged crank arms.
* Pinch bolts for simple installation without special tools.
* External sealed external bottom bracket bearing.
* Removable four bold spider, with flip/flop design for precision chain adjustment.
* CNC cut 4130 heat treaded hollow 10 spline spindle.
* Available in 160mm, 165mm,170mm and 175mm arm lengths.

The crank set include a 22mm hollow chromoly spindle, forged aluminum crank arm, independent chain ring spider and external bottom bracket. The 4 bolt, 104mm spider is placed directly on the spindle so it can be spaced in 1mm increments for precision chain alignment independent of the crank arms. This allows the cranks to remain placed directly under the rider to maintain a proper Q factor.

Installation is a breeze, the spider and crank arms slide easily on the spindle using a 6mm allen key to tightening the end boltsand the crank arm pinch bolts, no banging and pressing required.

Weight: 31oz